The tool goes in the "MANUALE (0X00EE)" status when the system can't automatically identify the ECU. This happens when the identification numbers are not present in the Allcartuning/Tuning24 and Dimsport databank.

Follow the instructions here below on how to proceed.


1.  Check the status of your ACTTuner unit to confirm.


2. Download the ID file from the ACTTuner and send it to your us via support@allcartuning.com.




3. We will notify you when the setting file is available in the databank.

N.B. After the confirmation from your us, you MUST wait AT LEAST 30 minutes before moving to the next steps.

4. Reset the device. 



5.  Perform a full update.  




6. Perform again the identification (ID) of the vehicle.

N.B Now the identification will be automatically carried out.
If it's still performed manually, you have to contact us.
  
7. Download the ID file, send it to us via support@allcartuning.com (see step number 2) and wait for the modified file (_MOD.FPF) from us.

8. Lastly, upload the .FPF file and write it into the ECU.