AGRI DELETE/TUNING Manuals and Descriptions
This Manual shows how to reset the DPF values via FENDIAS on all S4 Model equipped with a DPF. Just follow the photos step by step: ...
Wed, 27 Nov, 2019 at 2:51 PM
After flashing a modified File on a machine equipped with a Bosch EDC17CV56 ECU it is it's possible that it may not rev out to its full rpm potential o...
Fri, 29 Nov, 2019 at 11:35 AM
If you encounter the problem that after the writing procedure of the modified file the RPM does not go up all the way and the power seems to be weak then ju...
Tue, 7 Jul, 2020 at 2:24 PM
Your Tractor or Harvester is using too much fuel? Then an ECO Tuning is the option for you. The increase in torque and power in conjunction with the adjust...
Thu, 17 Sep, 2020 at 3:33 PM
Modern Agricultural and Construction machinery is full of emissions-control equippment. But this equippment can lead to a lot of headaches because of reliab...
Tue, 22 Sep, 2020 at 11:55 AM
The ECU on the New Holland Workmaster Tractors with 2.9L Engine is right on top of the engine:
Thu, 11 Feb, 2021 at 4:06 PM
On these machines it is necessary to also modify and program the Afrertreatment controller (DCU15) It is madatory that the pump then stays connected (DCU15)...
Tue, 13 Sep, 2022 at 3:25 PM
When you order an ACTuner for a Kubota machine it is very likey that you have also received the special kubota communication cable on the package. This is ...
Tue, 22 Jun, 2021 at 2:17 PM
On CNH machines with the Bosch EDC7UC31 ECU it is sometimes the case that the machine does not start after the modified file has been flashed on the control...
Mon, 19 Jul, 2021 at 11:44 AM
Sometimes it is necessary that a Dataset Registration is done on the machine after a modified file has been flashed on the ECU. There are to ways how that ...
Mon, 7 Feb, 2022 at 11:33 AM