New Genius
Cause 1) The cable used for the connection is not the correct one 2) The connection on the vehicle socket is not correct or the cable used is damaged 3...
Fri, 29 Jun, 2018 at 3:43 PM
Symptom New Genius tool cannot Read/Write, showing that error. Cause New Genius communication is not sinchronized with the ECU. The customer has performed ...
Fri, 29 Jun, 2018 at 3:38 PM
Symptom Writing process stops. Cause a) The dashboard of the car is NOT properly switched ON and after a while it turn off cutting power on the OBD port. ...
Fri, 29 Jun, 2018 at 3:52 PM
Symptom NewGenius tool stops during reading/writing process. Cause The battery voltage is too high. Solution Disconnect the booster or the battery charge...
Fri, 29 Jun, 2018 at 3:40 PM
Symptom NewGenius tool stops reading/writing giving Error 3202. Cause The communication speed between NewGenius tool and the Ecu is too high. Solu...
Fri, 29 Jun, 2018 at 3:42 PM
Symptom Race software cannot find the NewGenius tool. Cause Lack of communication between the connected USB device and the software. Solution Verify the...
Fri, 29 Jun, 2018 at 3:51 PM
Symptom The Race or FlashPoint program cannot communicate with the NewGenius tool. Cause Lack of communication between the connected USB device and the s...
Fri, 29 Jun, 2018 at 3:56 PM
Symptom After the erasing process, NewGenius cannot proceed with the writing. The recovery function does not solve the problem and it does not end properly ...
Fri, 29 Jun, 2018 at 3:59 PM
Symptom Error occurring with flash 99 /flash 116 /flash 117 After writing the modified file the veichle does not start or does not allow any other operatio...
Fri, 29 Jun, 2018 at 4:02 PM
Symptom New Genius stops during the reading giving the error 3A0B Micro protection not supported. Cause The microprocessor protection is not supporte...
Fri, 29 Jun, 2018 at 4:06 PM